Height：87-158cm（2.85'-5.18'）
Weight：3.7kg（8.15 lbs）
Material：Iron Base：Iron

Height：90-148cm（2.95'-4.86'）
Boom length：80cm（2.62'）
Weight：2.3kg（5.07 lbs）
Material：Iron
Base：Plastic
Height Adjustment Maximum: 58.32 in
Height Adjustment Minimum: 35.40 in
Construction: Iron material and Plastic base
Boom Length: 2.62 ft

-Lightweight with extra soft cushions for comfort fit
- Accurate and linear sound reproduction for professional Radio and TV applications
- Microphone provides audio transmission in broadcast quality
-Reliable performance ensures long lifetime use
- Folding design for easy storage

• Also suitable for recordings and room sound analysis systems
• Directivity: Omnidirectional
• Frequency range: 20 - 20,000 Hz
• 3-Pin male XLR connector
• Phantom power
• Noise ratio: 70 dB
• Equivalent noise level: 22 dB
• Peak SPL: 132 dB
• Diameter: 21 mm
• Weight: 0.15 kg
• Colour: Black
• Clip and windscreen included

SPECIFICATIONS

• Microphone Type:FET Transformerless Condenser
• Polar Pattern:Cardioid, Figure-8, Omidirectional
• Diaphragm Size:Dual large diaphragm
• Frequency Range:20Hz-20kHz
• Max SPL:147dB SPL, 157dB with pad
• Output Impedance:100 ohms
• Signal to Noise Ratio:85dB (A weighted)
• Self Noise:9dB (A weighted)
• Low Cut Filter:70Hz
• Pads:-10dB
• Color:Silver
• Connector:XLR
• Power Source:48V phantom power
• Weight:1.1 lbs.

• 2000 watts of peak power delivers clarity, punch and more than enough headroom for any performance or practice space
• Specially-voiced 8-inch woofer and high-frequency compression driver delivers your drum sounds with precise, full response across the entire frequency range without any artificial colouration
• (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
• XLR output to link another Strike Amp 12 or send your performance to another input device
• Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
• Contour EQ switch to control your sound
• Ground-Lift switch eliminates unwanted noise
• Includes: IEC Power Cable, User Guide, Safety and Warranty Manual

SPECIFICATIONS

• Number of Channels:2
• Power Class:Class AB
• Watts/Side @ 8 ohms:1,000W
• Watts/Side @ 4 ohms:1,350W
• Watts Bridged:2,700W @ 8 ohms
• Inputs:2 x RCA, 2 x XLR
• Outputs:2 x speakON, 2 x Binding Post
• Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
• Rack Spaces:2U
• Height:3.5"
• Depth:14.4"
• Width:19"
• Weight:43 lbs.

Features:

- Stereo/parallel/bridge-mono mode

- User selectable input sensitivity - 0.775V and 1.4V

- Efficient forced-air cooling prevents excessive thermal buildup

- Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs

- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel

- Protection against shorts, no-load, on/off thumps and radio-frequency interference

• GHS weighted action is heavier in the low keys and lighter in the high keys, just like an acoustic piano
• Matte black key tops absorb moisture and remain tactile after extended use without becoming slippery
• Pure CF Sound Engine with 4-level sampling faithfully reproduces the tone of a meticulously sampled Yamaha 9' CFIIIS concert grand
• Damper Resonance DSP re-creates the sound of the inside of a grand piano when the dampers are off the strings
• String Resonance recreates the sympathetic sounds of all undamped strings resonating, mimicking the behaviour of acoustic pianos
• Key-off samples provide the delicate change in sound the instant the damper falls back to the string
• USB to host with MIDI and audio transfer for single-cable connectivity to your music-making software
• Sound Boost adds EQ and volume to help the instrument project and cut through the mix using its onboard speakers, allowing you to be heard in small ensemble situations, such as an acoustic jazz trio
• The stereophonic Optimizer adjusts the spatial distribution of sound in headphones, creating the perception that sound is coming from the piano, rather than from the headphones
• Split mode lets you play a different voice with each hand

• Body Shape: Telecaster®
• Body Material: Poplar
• Body Finish: Gloss Polyurethane
• Neck Profile: "C" Shape
• Fretboard Material: Maple
• Fretboard Radius: 9.5" (241 mm)
• Scale Length: 25.5" (64.77 cm)
• No. of Frets: 21 Narrow Tall
• Fretboard Inlays: Black Dot
• Pickups: Standard Single-Coil Tele® (Bridge), Standard Single-Coil Tele® (Neck)
• Bridge: 6 Saddle Strings-Through-Body Tele
• Pickguard: 1-Ply Black
• Strings: Nickel Plated Steel (.009-.042 Gauges)
• Tuning Machines: Standard Cast/Sealed
• Hardware Finish: Chrome

• Body Shape: Telecaster®
• Body Material: Poplar
• Body Finish: Gloss Polyurethane
• Neck Profile: "C" Shape
• Fretboard Material: Indian Laurel
• Fretboard Radius: 9.5" (241 mm)
• Scale Length: 25.5" (64.77 cm)
• No. of Frets: 21 Narrow Tall
• Fretboard Inlays: White Pearloid Dot
• Pickups: Standard Single-Coil Tele® (Bridge), Standard Single-Coil Tele® (Neck)
• Bridge: 6-Saddle Hardtail
• Pickguard: 1-Ply Parchment
• Strings: Nickel Plated Steel (.009-.042 Gauges)
• Tuning Machines: Standard Cast/Sealed
• Hardware Finish: Chrome

• Body Shape: Stratocaster®
• Body Material: Poplar
• Body Finish: Gloss Polyurethane
• Neck Profile: "C" Shape
• Fretboard Material: Maple
• Fretboard Radius: 9.5" (241 mm)
• Scale Length: 25.5" (64.77 cm)
• No. of Frets: 21 Medium Jumbo Frets
• Fretboard Inlays: Black Dot Inlays
• Pickups: Ceramic Humbucker (Bridge), Ceramic Single-Coil (Middle), Ceramic Single-Coil (Neck)
• Bridge: 2-Point Synchronized Tremolo with Block Saddles
• Pickguard: 3-Ply Black
• Strings: Nickel Plated Steel (.009-.042 Gauges)
• Tuning Machines: Sealed Die-Cast with Split Shafts

Hardware Finish: Chrome

• Body Shape: Stratocaster®
• Body Material: Poplar
• Body Finish: Gloss Polyurethane
• Neck Profile: "C" Shape
• Fretboard Material: Indian Laurel
• Fretboard Radius: 9.5" (241 mm)
• Scale Length: 25.5" (64.77 cm)
• No. of Frets: 21 Medium Jumbo Frets
• Fretboard Inlays: White Dot Inlays
• Pickups: Ceramic Humbucker (Bridge), Ceramic Single-Coil (Middle), Ceramic Single-Coil (Neck)
• Bridge: 2-Point Synchronized Tremolo with Block Saddles
• Pickguard: 3-Ply Black
• Strings: Nickel Plated Steel (.009-.042 Gauges)
• Tuning Machines: Sealed Die-Cast with Split Shafts
• Hardware Finish: Chrome

• Body Shape: Stratocaster®
• Body Material: Poplar
• Body Finish: Gloss Polyurethane
• Neck Profile: "C" Shape
• Fretboard Material: Laurel
• Fretboard Radius: 9.5" (241 mm)
• Scale Length: 25.5" (64.77 cm)
• No. of Frets: 21 Medium Jumbo Frets
• Fretboard Inlays: White Dot Inlays
• Pickups: Ceramic Single-Coil (Bridge), Ceramic Single-Coil (Middle), Ceramic Single-Coil (Neck)
• Bridge: 2-Point Synchronized Tremolo with Block Saddles
• Pickguard: 3-Ply Mint Green
• Strings: Nickel Plated Steel (.009-.042 Gauges)
• Tuning Machines: Sealed Die-Cast with Split Shafts
• Hardware Finish: Chrome

• Body : Paulownia, High gloss
• Neck : Roasted Maple, bolt-on, 867 mm, (34.2") Satin finish
• Fingerboard : Rosewood, 20 frets
• Pickguard : Black, 3 plys
• Pickups : 2 x JB
• Controls : 2 x Volume + 1 x Tone
• Bridge : "JB" Classic
• Machine Heads : Standard, nickel
• Colour : Black

Features:-
•    D’Addario 80/20 Bronze acoustic guitar strings are precision wound over a hexagonal high carbon steel core.
•    The 80/20 Bronze wrap wire provides bold, bright acoustic sound, with crisp projection that fills the room.  •    80/20 Bronze was originally created by John D’Addario Sr. and renowned guitar maker John D’Angelico in the 1930s.
•    Our 80/20 Bronze acoustic guitar strings come with a code on the recyclable VCI bag, which you can register to earn Players Circle points.
•    D’Addario 80/20 Bronze strings are made in the USA—drawn to our exacting specifications at our New York production facility.

FEATURES
Punchy, bright, high-output strings
Beefy lows with increased definition and growl
Increased midrange focus, harmonics, and sustain
Roundwound
Tin-plated hex steel core Nickel-plated steel wrap

FEATURES:

41 inch

Auditorium body shape

Upgraded HPL body material

Richlite fingerboard

New 2nd Gen BT neck joint technology

Die cast machine head

High quality free accessory

20 frets

648 mm scale length

• Passive DI Box with stereo input and summed mono output
• Custom-built Midas transformer for highest signal integrity
• High headroom design offers superior sound quality
• Passive design does not require any power supply
• Stereo input on 1/8" TRS and RCA connectors
• Fully adjustable level control for both channels
• High quality Neutrik* XLR connector
• Earth Lift switch eliminates ground loop problems
• Fully transformer-isolated design ensures electrical separation
• Ultra-low noise and ultra-linear system for highest signal integrity
• Aluminium extrusion casing with protective rubber corners
• Compact and rugged design
• Designed and engineered in the U.K.

• 600 Denier polyester; 10mm padding with soft touch microfiber lining
• Reverse water-resistant zipper with custom ergonomic zipper pulls
• Comfortable two-piece handle plus a recessed grab handle; ergonomic air mesh backpack straps with easily adjustable ladder lock buckles
• ID tag holder
• Front storage pocket with business card window, pocket for extra strings, fixed tool pouch

• Material: pure copper core, brass nickel plated DC plugs.（Better conductivity）
• Type: 1 female and 8 male plugs.（Male plugs are tuning fork plugs, fit tightly and prevent from short circuit）
• Dimensions: DC female straight plug: inner ring:5.5mm, inner needle: 2.1mm.4 DC male elbow plugs: outside diameter: 5.5mm, inside diameter:2.1mm.
• Color: Black（high quality PVC casing, diameter of casing: 3mm）
• Length: total length: 2640mm; length between the 2 plugs: 330mm

• Heat resistant - safe to leave in the truck
• Thin body and lightweight -easy to carry
• Arched back and radius fretboard
• Water-resistant, easy to clean
• Free accessories (Bag, Capo, String and Strap)

• Heat resistant - safe to leave in the truck
• Thin body and lightweight -easy to carry
• Arched back and radius fretboard
• Water-resistant, easy to clean
• Free accessories ( Bag, Capo, Strap and String)

• Brand: KAKA
• Top Material Type: Rose Wood, Mahogany Wood, Koa Wood
• Body Material: Rosewood, Plastic
• Back Material Type: Mahogany Wood, Koa Wood
• Neck Material Type: Mahogany
• Fretboard Material Type: Rosewood
• String Material Type: Nylon
• Hand Orientation: Right
• Number of Strings: 4

• Body size: Soprano
• Top: SOLID Engelman Spruce top
• Back & Side: African Mahogany
• Neck: African Mahogany
• Nut & Saddle: Nu-Bone
• Fingerboard & Bridge: Richlite
• Tuner peg: Die-cast
• Finish: Exquisite Matte
• Strings: fluro carbon by enya made in Japan

• Fits Gibson Flying V¬, Gibson Explorer¬, Dean ML, Warlock, and Other Extreme Shaped Guitars
• Rugged, 600-Denier nylon exterior forms a durable, water-resistant outer shield
• 10mm Internal Padding
• Reinforced headstock and neck support protects your instrument at its most vulnerable point
• Spacious exterior storage pocket keeps your favorite strings, picks and accessories organized
• Heavy-duty nylon carry handle gives you a firm grip
• Adjustable, shoulder strap makes it comfortable and easy to take your bag on the road

• Includes 14 "Hi-Hats,18 "Crash, 20" and ride cymbals
• Made of MS63 brass alloy
• Suitable for all volume settings, playing, live, and the full range of music styles
• Bright, clean, powerful sound

• Cardioid and polar pattern
• 9.7mm back electret condenser
• RF shielding ▪ High-pass filter (E322L & M)
• On/Off switch with LED (E322LS & MS)
• 18 and 24 inch overall lengths
• Balanced preamplifier output

FEATURES

• High-performance 500-Watt powered subwoofer for PA applications
• Powerful 12'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass
• Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact
• State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection
• Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers
• Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance
• Variable High Cut control for perfect sound alignment
• Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers
• Power, Signal and Clip LEDs for perfect monitoring
• Intelligent limiter for maximum sound performance and woofer protection
• Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
• Pole socket for mounting with commercial spacer poles
• Ergonomically shaped handles for easy transport
• Rugged steel grill for optimal speaker protection
• Designed and engineered in Germany